湖北杭荣电气有限公司 收藏

杭荣ICS-17A型电子皮带秤自校砝码

The Series 17 Belt Scale System is specifically designed for plant and pro ss operations that run at high rates of speed or require the better-than-normal accuracy of ±0.25. The Series 17 lets you monitor production output and inventory, or regate product loadout, while providing vital information for the effective management and efficient operation of your business.

The Series 17 Belt Scale System combines the time-proven reliility of the 10-17 Weighbridge and the 60-12 Belt Speed Sensor with the power and versatility of the advan d electronics in the Micro-Tech 2000 and Micro-Tech 3000 series of electronic integrators.The long weighbridge design of the Series 17 allows this model to be offered as a highly accurate 0.25 scale system. The longer weighbridge permits more scale-borne time, which minimizes alignment errors. This translates into better accuracy.
This belt scale system is availle in two or four idler versions.
Performan Guarantee
On factory-approved installations, we guarantee that the Series 17 Belt Scale System will weigh and totalize to a value within 0.25 of the test value when calibrated against a known test weight, chain, or Thermo Scientific’s standard electronic calibration.

概述

   ICS17系列皮带秤，动态累误差小于±0.5，用于工厂和过程称重中，监测量、控制产品装载及监测产品库存量，为企业现代化管理提供重要的信息。
结构组成
   ICS17系列皮带秤主要由以下几部分组成：17型杠杆式称重桥架、60-12C型测速传感器、称重传感器、XK2001型积算器。
工作原理
  称重桥架中的称重传感器检测皮带上物料重量，送入积算器；测速传感器检测皮带速度，将速度信息送入积算器。积算器把接收到的速度信号及重量信号进行处理，得到物料的累计量及瞬时流量。
17A型称重秤架
   17A型称重桥架在杠杆上装有四组或二组托辊，采用双称重传感器支承，外侧支承采用无磨擦耳轴支点，这种封闭装置可以防震、防潮、防腐及防止物料堆积，因而在恶劣的环境中不发生使用刀口装置和轴承装置带来的问题。
  称重桥架的主梁采用矩型钢管，这使整个称重桥架有足够的钢性、较小的自重，外表积灰面积达到 。为了整个系统的稳定性，度电阻应变片式传感器安装于受拉部位，以减少非线性误差。
  称重桥架可以直接装在各种不同宽度的皮带输送机架内，位于上下皮带之间，不占用空间度。它是一个已在工厂组装好的整体，可以迅速方便地安装和校准
  该称重桥架适应皮带宽度从400-2200mm。
特点
◇无运动或磨损部件，维护量小：
◇抗侧向力、水平分力设计，皮带跑偏、水平分力影响小
◇整体变形小于0.1mm
◇强度矩形管，保持校准的稳定，减少物料堆积及零点漂移